Flocked Air Bed Single #24157

Product Specifications

• Dimensions: 191cm x 73cm x 22cm (± 75in x 29in x 9in)
• Size: Single standard bed profile
• Weight Capacity: Up to 100 kg (220 lbs)
• Surface Type: Soft waterproof flocked finish to prevent sheets from sliding

Inflation Instructions

1. Prepare the Area: Lay out the mattress completely flat on a smooth surface free of sharp objects. Ensure the flocked (velvet-like) side faces upward.
2. Locate the Valve: Find the large 2-in-1 safety valve on the side or corner of the mattress structure.
3. Connect Your Pump: Unscrew the outermost cap. Attach a standard manual foot/hand pump or a 16mm electric air pump nozzle securely into the opening.
4. Inflate: Pump air until the bed is firm to the touch but retains slight flexibility when compressed. Avoid over-inflating beyond full expansion to protect the internal coil seams.
5. Seal Tightly: Disengage the pump and immediately push the valve cap firmly back into position to ensure an airtight seal.

Note: New vinyl naturally stretches upon initial use. It is normal for the mattress to feel softer after the first few hours; simply top it up with a small amount of air as the material acclimates.